Descargar Imprimir esta página

Hisense HRM260N6TSE Manual De Operaciones página 26

Publicidad

Idiomas disponibles

Idiomas disponibles

Although this appliance
automatically defrosts, a layer of
frost may occur on the freezer
compartment's interior walls if the
freezer door is opened frequently or
kept open too long.
If the frost is too thick, choose a time
when the freezer is nearly empty and
proceed as follow:
1. Remove existing food and
accessories baskets, unplug the
appliance from the mains power
and leave the doors open.
Ventilate the room thoroughly to
accelerate the process.
2. When defrosting is completed,
clean your
Do not use sharp objects to
remove frost from the freezer
compartment.
Only after the interior is
completely dry should the
appliance be switched back on
and plugged back into the mains
socket.
Door seals cleaning
Take care to keep door seals clean.
Sticky food and drinks can cause
seals to stick to the cabinet and tear
when you open the door. Wash the
seals with a mild detergent and
warm water. Rinse and dry them
thoroughly after cleaning.
Warning
Replacing the LED light
To replace the LED light, the below
steps can be followed:
1. Unplug your appliance .
2. Hold a thin blade, insert it into the
gap at either end of the
lampshade, and tilt one end of the
lampshade.
3. Move the blade insertion position
to the other end and tilt the
lampshade section by section until
the lampshade falls off.
4. Press the elastic snap of the light
box with a thin-blade screwdriver,
and pull one end of the elastic
snap of the LED light until the LED
light is detached and then pull out
the connecting terminal of the LED
light.
5. Replace the LED light, install it and
lampshade correctly in place.
The LED light should be replaced
by a professional. If the LED light is
damaged, contact the customer
helpline for assistance.
Warning
26

Publicidad

loading