Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Problem
The oven is not working.
The display shows the letter "F"
followed by a number.
The oven does not heat up.
The function does not start.
The function is not available in
demo mode.
The
icon is shown on display.
The connectivity is not
supported.
Policies, standard documentation and additional product information can be found by:
•
Using the QR code in your appliance
•
Visiting our website docs . whirlpool . eu
contact our After-sales Service
•
Alternatively,
sales Service, please state the codes provided on your product's identification plate.
14
Possible cause
Power cut.
Disconnection from the
mains.
Software fault.
When "DEMO" is "On" all
commands are active and
menus available but the
oven doesn't heat up.
Demo mode is running.
The WiFi router is off.
The router settings have
changed.
The wireless connections
does not reach the
appliance.
The oven is unable
to establish a stable
connection to home
network.
The connectivity is not
supported.
Remote operation is not
permitted in your country.
(See phone number in the warranty booklet). When contacting our After-
Solution
Check for the presence of mains electrical
power and whether the oven is connected to
the electricity supply.
Turn off the oven and restart it to see if the
fault persists.
Contact you nearest Client After-sales Service
Centre and state the number following the
letter "F".
Access "DEMO" from "SETTINGS" and select
"Off".
Press
, tap
"Info" and then select
"Store Demo Mode" to exit.
Check that the WiFi router is connected to the
Internet.
Check that the WiFi signal close to the
appliance is strong.
Try to restart the router
See the "WiFi FAQs" section.
If your home wireless network settings have
changed, connect to the network: Press
tap
"WiFi" and then select "Connect to
Network".
Check whether your country allows remote
operation of electronic appliances before
purchasing.
,
400011685110
Publicidad
