VEVOR E490T Manual Del Usuario página 144

Safety caution
1. Open the box and check
When you open the package of the machine,firstly you should check the
machine and relevant accessories. Please contact the seller or company if
there is any damage or shortage.
●
1 set of main engine
●
1 set of tools
●
1 blade and 1 power line
2. Machine installation
 Open the wooden crate ,take out the machine casing
and discharge the fixed screws on the base plate of
the main machine;
 The machine casing needs to be assembled
completely,and the screws should be fixed firmly.
3. Environmental conditions.
 The machine should be placed in clean working
environment.keep away from direct sunlight and
wind.
 Temperature of operating
environment :10-30℃ ,should not exceed 32℃ ;
 Humidity level of the operating environment: 50-80%
 Connect the ground wire correctly.
4. Special suggestions
 Remember only one professional operator is allowed to operate the
machine;
 When you cut ,you should operate buttons by both of your hands;
 Please don' t disassemble infrared safety covering.
 When you put your hands or other things into the cutting area, you
must cut the power firstly;
●
1 set of chassis
●
4 screws for tool removal
●
●
1 warranty certificate
1 instruction manual
●
1 Certificate