GRE Dream Salt GSS25 Manual De Instalacion Y Uso página 11

4. Water Temperature Detection
a) The system will start water temperature detection after finishing water flow
detection. The range of working water temperature is between 10 °C and 55 °C, if the
temperature is over this range, the system starts a protection program.
 The display panel shows "EE01" when the water temperature is too low, and
the error indicator is on.
 The display panel shows "EE02" when the water temperature is too high, and
the error indicator is on.
The protection program will be removed once the water temperature is within the
normal range.
Low Temp
b) Press the "MENU" key to switch the screen of display panel, and then check
the water flow temperature and the device temperature. Press the "+" / "-" key to
change the water flow temperature unit °C / °F. The default unit is °C.
High Temp
7 | Page
EN