GRE Dream Salt GSS25 Manual De Instalacion Y Uso página 12

5. Salinity Detection
a) The range of salinity is between 1500 PPM and 4500 PPM, and the ideal
salinity is 3000 PPM.
 The low salt indicator and add salt indicator are both on when the system
detects low salinity, and the display panel shows the amount of salt adding, the
unit is "KG", meanwhile, the system starts the protection program.
The High salt indicator and error indicator are both on when the system

detects high salinity, and the display panel shows "EE03" defect code,
meanwhile, the system starts the protection program.
The protection program will be removed once the salinity is within the normal range.
b) Press the shortcut key
shows the value of salinity (PPM), press the shortcut key
automatically exits after 6s.
6. Boost Mode
In boost mode, the working time is tripled from normal working time and the setting time will
not be over 24 hours. The device will stop working for 30 minutes after the boost mode stops,
and will then start up in normal status.
Long press the shortcut key
the system starts the boost mode. Long press the shortcut key
and the boost indicator is off.
Note: When setting the timer mode during boost mode working time, the system will exit
boost mode automatically.
Low Salinity
, the salinity indicator is on and the display panel
for more than three seconds, the boost indicator is on and
High Salinity
again to exit. Or it
again to exit boost mode,
8 | Page
EN