Conducted RF
3 V rms 150 kHz to 80
rf coupled into lines
MHz outside ISM bands
(IEC 61000-4-6)
6 VRMS 150 kHz to 80
MHz inside ISM bands
3 V/m
80 MHz – 2.7 GHz
Radiated rf
(IEC 61000-4-3)
Portable
communications equipment should
be used no closer to any part of
the, including cables, than the
recommended separation distance
calculated
applicable to the frequency of the
transmitter as below.
3 Vrms
Recommended
distance
d=1.2P
6 Vrms
d=0.58/P 80 MHz to 800 MHz
10 V/m
d=0.70P 800 MHz to 2.5 GHz
where P is the maximum output
power rating of the transmitter in
watts
(W)
transmitter manufacturer and d is
the
recommended
distance in metres (m).
Field strengths from fixed RF
transmitters, as determined by an
electromagnetic
should be less than the compliance
level in each frequency range
Interference may occur in the
vicinity of equipment marked with
the following symbol:
and
mobile
RF
from
the
equation
separation
according
to
the
separation
a
site
survey
,
b
.
16