Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
To operate the compressor Nebulizer, do the following:
1. Plug in the Compressor, but do not connect the Nebulizer Set.
2. Make sure that the air filter is attached to the Compressor.
3. Turn on the power switch.
4. After the Compressor runs properly for 1-2 minutes, connect the jet outlet of
the Compressor to the inlet of the Nebulizer Set
5. Begin treatment according to your physician's instructions.
6. Inhale and exhale naturally. Be sure to stop when the medicine is used up.
7. When you have finished, turn the air compressor unit off before you disconnect
the air hose.
WARNING – Do not use near flammable objects or locations near explosive
materials.
WARNING
– Nebulizer Set with DISPOSABLE accessory for single patient single use
only.
COMPRESSOR NEBULIZER CLEANING
1. With power switch in the "Off" position, unplug power cord from wall outlet.
2. Wipe outside of the compressor cabinet with a clean damp cloth every few days to
keep dust-free.
DANGER–Do not submerge in water; doing so will result in compressor damage.
9
Publicidad
