Makita TD090D Manual De Instrucciones página 4

ENGLISH (Original instructions)
1. Button
2. Battery cartridge
3. Switch trigger
4. Lamp
5. Reversing switch lever
SPECIFICATIONS
Capacities
No load speed (min
Impacts per minute
Overall length
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2014
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General power tool safety
warnings
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
4
Explanation of general view
6. Bit
7. Sleeve
8. Bit-piece
9. Standard bolt
10. Fastening torque
Model
Machine screw
Standard bolt
High tensile bolt
-1
)
Net weight
CORDLESS IMPACT DRIVER
ENE033-1
SAFETY WARNINGS
1. Hold the power tool by insulated gripping
surfaces, when performing an operation where the
fastener may contact hidden wiring. Fasteners
GEA010-2
contacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an
electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
4. Wear ear protectors.
5. Do not touch the bit or the workpiece immediately
after operation. They may be extremely hot and
could burn your skin.
6. Keep hands away from rotating parts.
7. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
8. Hold the power tool by insulated gripping
surfaces, when performing an operation where the
cutting accessory may contact hidden wiring.
Cutting accessory contacting a "live" wire may make
11. Fastening time
12. Proper fastening torque
13. High tensile bolt
TD090D
4 mm - 8 mm
5 mm - 14 mm
5 mm - 10 mm
0 - 2,400
0 - 3,000
155 mm
0.92 kg
D.C. 10.8 V
BL1013
DC10WA
GEB137-1