ErgoAV ERMMM6-01B Manual De Instrucciones página 12

2B-1
2B-2
2B-3
Wall Thickness
≥5 1/2
03
A2
11
(140mm)
"
Position the Wall Plate Template [03] at
your desired height. Level the Wall Plate
Template [03] and mark the pilot hole
locations.
(Not Included)
Drill 6 pilot holes using a 3/8" (10mm)
diameter drill bit. Make sure the depth of
the pilot holes is not less than 3"
(75mm).
Electric Drill
(Not Included)
Use the hammer to knock the Wall
Anchor [A2] into the wall. Be sure the
Wall Anchor [A2] are seated flush with
the concrete surface.
Pencil
Level
(Not Included)
"
3 (75mm)
"
3/8 (10mm)
Hammer
(Not Included)