ErgoAV ERMMM6-01B Manual De Instrucciones página 13

2B-4
02
A1
NOTE: DO NOT use a drill to tighten the
Lag Screws [A1]. Only use a socket wrench.
Supplied Parts and Hardware for Step 3
Step 3 Secure the Arm Assembly to the Wall Plate
1. Hang the Arm Assembly [04] to the Wall Plate [02].
2. Shift the Arm Assembly [04] along the Wall Plate [02] to your desired position.
3. Lock the safety lock clockwise.
HEAVY! You may need
assistance with this step.
02
Install the Wall Plate [02] using the Lag
Screws [A1]. Using a self-supplied 1/2"
(13mm) socket wrench, tighten the Lag
Screws [A1] until the Lag Screws [A1] are
pulled firmly against the Wall Plate [02].
DO NOT over-tighten the Lag Screws
[A1].
Arm Assembly
04
12
Level
(Not Included)
x 1
04
1/2" (13mm)
Socket Wrench
(Not Included)