Publicidad
Idiomas disponibles
Idiomas disponibles
Pièces et matériel fournis pour l'étape 2
Remarque : Le tire-fond est représenté en taille réelle.
A1
x 4
Ancre de mur
x 4
A2
10X60mm
Plaque murale
5/16
pouce
Cet ancrage est destiné aux
murs en béton UNIQUE-
MENT. NE PAS les utiliser
dans des cloisons sèches ou
les montants en bois.
02
x 1
Tire-fond
x 2 3/4
pouce
ATTENTION!
Remarque :
1. Avant de suspendre la plaque murale [02]
au mur, vous devez retirer les couvercles
supérieur et inférieur. Installez le couvercle
après avoir installé la plaque murale [02].
2. Faites attention aux positions supérieure et
inférieure des panneaux muraux, et
l'installation inverse est interdite.
22
Complete Step 1 in owner's manual before mounting wall plate.
16" (406.4mm)
1.
2.
3.
4.
OR
03
A1
02
Use a stud finder (not included) to locate
Position the Wall Plate Template [03] at
Drill pilot holes using a 7/32" (5.5mm)
Install the Wall Plate [02] using Lag Screws
wood studs or use an awl (not included)
your desired height and line up the holes
diameter drill bit. Make sure the depth
[A1]. Tighten the Lag Screws [A1] is pulled
to verify the edges. Mark the edge and
with your stud center line. Level the Wall
is not less than 2 3/4" (70mm).
firmly against the Wall Plate [02]. DO NOT
center locations.
Plate Template [03] and mark the holes.
over-tighten the Lag Screws [A1].
1/2" (13mm)
Level
Pencil
2 3/4" (70mm）
Electric Drill
Level
Socket Wrench
(Not Included)
(Not Included)
(Not Included)
(Not Included)
(Not Included)
Questions or Need Help
ErgoAV Customer Care
Phone: (877) 419-7832 support@ergoav.com
Modèle de mur
03
x 1
Publicidad
