Publicidad
Idiomas disponibles
Idiomas disponibles
Piezas y herrajes suministrados para el paso 2
Nota: El tornillo de retraso se muestra en tamaño real
A1
x 4
Anclas de pared
x 4
A2
10X60mm
Plaque murale
Tornillo de retraso
5/16X2 3/4 pulg
Este taco es SOLO para
paredes de hormigón. No
los utilice en paredes de
yeso o madera.
02
x 1
PRECAUCIÓN!
Nota:
1. Antes de colgar la plata de pared [02] en
la pared, debe remover las cubiertas de
arriba y abajo. Instale la cubierta luego de
instalar la placa de pared [02].
2. Préstele atención a las posiciones superior
e inferior de los paneles de pared; la
instalación inversa está prohibida.
36
Complete Step 1 in owner's manual before mounting wall plate.
16" (406.4mm)
1.
2.
3.
4.
OR
03
A1
02
Use a stud finder (not included) to locate
Position the Wall Plate Template [03] at
Drill pilot holes using a 7/32" (5.5mm)
Install the Wall Plate [02] using Lag Screws
wood studs or use an awl (not included)
your desired height and line up the holes
diameter drill bit. Make sure the depth
[A1]. Tighten the Lag Screws [A1] is pulled
to verify the edges. Mark the edge and
with your stud center line. Level the Wall
is not less than 2 3/4" (70mm).
firmly against the Wall Plate [02]. DO NOT
center locations.
Plate Template [03] and mark the holes.
over-tighten the Lag Screws [A1].
Pencil
Level
(Not Included)
2 3/4" (70mm）
Electric Drill
Level
(Not Included)
(Not Included)
(Not Included)
Questions or Need Help
ErgoAV Customer Care
Phone: (877) 419-7832 support@ergoav.com
Plantilla de pared
03
x 1
1/2" (13mm)
Socket Wrench
(Not Included)
Publicidad
