Checking The Fan Belt; Checking The Battery; Checking The Grounding Protection; Checking The Coolant And Oil Leakage - GENERGY GDS20T Instrucciones De Uso

WARNING
1) Do not smoke or make light fires near the generator set when filling
the engine oil.
2) Often open the drain plug in the fuel tank to drain the sediment and
impurity.

4.5 Checking the fan belt

Check the tension and the extend length of the belt. Check the belt if good or
not. Replace it if necessary. Refer to its engine manual for the regulation or
replacement of the belt.

4.6 Checking the battery

Check if the battery is full charged. Check the battery connection cables. Take
care to tighten the loosened battery terminal with spanner and keep clean in
order to avoid oxidation.

4.7 Checking the grounding protection

The generator set frame and load must be installed grounding protection, and
make sure the grounding protection is ok.

4.8 Checking the coolant and oil leakage

Inspect the wholly unit and open the door to check if there is coolant leakage
and oil leakage. If there is, please contact with your dealer for service.

4.9 Check the looseness of the parts

Check the nuts and screws if loosened. If loosened, tighten them. Specially
inspect the air cleaner, muffler and charging alternator. Pay attention to the
broken cables and loosened terminal.
55