Create Kettle Ceramic Manual De Instrucciones página 9

• To prevent the kettle from turning on and off, remove it from the electric base.
• Place the kettle on a stable heat-resistant surface until it has cooled completely.
• Do not fill the kettle with water until it is cold. It could splash and create burns.
• Check that the kettle is switched off.
• Unplug the base from the electrical outlet.
• Let the kettle cool down completely.
• Clean the exterior of the kettle and the electric base with a damp cloth.
• If necessary, a mild (dishwasher) detergent can be used.
• Keep all connectors and plugs dry.
• Do not place the kettle or electric base in liquids or in the dishwasher.
• Do not use solvents or strong or abrasive cleaning agents.
DECA LCI F Y
• Descale regularly, even in soft water areas
• Use a descaler suitable for plastic products (most kettles have some plastic parts).
• Follow the instructions provided with the descaler.
• If you don't have a descaler, you can also use white vinegar. Fill the kettle with half a liter of
vinegar and let stand 1 hour without heating.
• You can also use citric acid. Boil a liter of water, add 25 g of citric acid and let it sit for 15
minutes.
• After descaling, rinse several times, fill, boil and discard the water to remove all chemical
residues.
• IMPORTANT: Do not use other descalers such as those containing formic or sulfamic acid.
P RO B L E M R E SOLUT IO N
• If the kettle does not work, check if the cord is plugged in correctly, if the electricity is on
or the kettle is placed properly on the base.
• If the kettle boils dry, the safety cut-off device will activate. Wait for the kettle to cool
and refill it with water. Press the switch and the kettle will automatically restart and
start to boil.
• If the appliance turns off before boiling: it means that the kettle needs to be descaled.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
CLEANING AND MAINTENANCE
E NGLI SH
9