JB INDUSTRIES CLIMATE CLASS DV-22W Manual De Instrucciones página 5

Rotating Screen Orientation
1. On the home screen press the ENTER
button to rotate the screen 90 degrees
clockwise from the current orientation
2. Repeating the process in the previous
step will result in further rotation. Rotate
until desired orientation is obtained
3. Shutting down the unit will save your last
used orientation and will start up in the
same orientation last displayed
Assigning the Gauge Identifier ("V" number)
1. Press and hold ENTER button to enter the menu
2. Press POWER button to cycle to "Vacuum #"
3. Press ENTER button
4. Cycle through the numbers and press ENTER button when the desired number
is highlighted
5. The vacuum gauge will return to the home screen and the new vacuum gauge
identifier number will be used
Changing Vacuum Units
1. Press and hold ENTER button to enter the menu
2. Press POWER button to cycle to "Units," and then press ENTER button to
select continue
3. Press POWER button to cycle through the units and press ENTER button to
select the units
JB INDUSTRIES • Wireless Vacuum Gauge Operating Manual • 630.851.9444 • sales@jbind.com
5