Ashdown Engineering THE ELIZABETH Serie Guia Del Usuario página 4

ASHDOWN ENGINEERING - ELIZA
- BT : Wireless BT Mode
1. Short press the power/mode key on the front panel of the speaker or short press
the corresponding mode key on the remote control to make it switch between
different modes.
2. The indicator light will jump to the corresponding position, indicating that you
have selected the corresponding audio source.
USB PLAYBACK -
Supported Music File Formats:
- MP3
- WAV
- FLAC
- APE
1. Insert a USB Flash Drive with the above format music files to the USB jack on the
back panel of the speaker.
2. Short press the Power/Mode button on the front panel of the speaker or short
press the corresponding USB playback mode key on the remote control to put it in
USB local/playback mode.
3. The system will automatically identify the music file and turn on the corresonding
play sequence track.
4. Short press the remote control number key to jump to the corresponding play
sequence track.
5. Long press the remote control previous song, next song, fast rewind and fast
forward.
USER GUIDE
ASHDOWN ENGINEERING - ELIZA
CONNECTING THROUGH THE AUDIO INPUT CONNECTOR -
1. Plug a 3.5mm stereo plug into the AUX input on the back of the stereo.
2. Connect the other end of the audio cable to the audio output connector of your
audio device.
3. Short press the Power/Mode button on the front panel of the stereo or short press
the corresponding AUX input mode key on the remote control to make it in the AUX
input mode.
CONNECTING VIA THE OPTICAL INPUT CONNECTOR -
1. Connect a standard optical audio plug into the input connector on the OPTICAL
label on the back of your speaker.
2. Connect the other end of the optical fiber to the OPTICAL output connector of
your audio device.
3. Short press the Power/Mode button on the front panel of the stereo or short press
the corresponding DPT mode button on the remote control to switch to optical
power mode.
CONNECTING VIA BT (PAIRING) -
1. Short press the power/mode button on the front panel of the speaker or short
press the corresponding BT mode button on the remote controls to make it in BT
wireless connection mode.
2. Enable the BT on your device (cell phone, tablet, computer etc).
3. Select "ELIZA" in the BT menu on your device and agree to pairing. When the
device is successfully connected, the BT indicator on the device stops flashing and
stays on constantly.
- BT waiting for pairing: BT indicator blinks
- BT pairing is successful: BT indicator is always on
USER GUIDE