Ashdown Engineering THE ELIZABETH Serie Guia Del Usuario página 5

ASHDOWN ENGINEERING - ELIZA
CLEAR THE SPEAKER CONNECTIONS -
This operation can clear all the BT information of the machine, please operate
carefully! After clearing, you can follow the steps to reconnect.
1. Turn the speaker to the corresponding mode, such as BT mode.
2. Press and hold the corresponding Play/Pause button on the front panel or remote
control.
3. Wait for a few seconds, the corresponding status indicator on the machine will
change from constant flashing, which means the clearing is successful.
ADJUSTING VOLUME / BASS / TREBLE -
ELIZA contains three controls for adjusting audio
1. Volume Knob
2. Bass Knob
3. Treble Knob
PLAY / PAUSE / PREVIOUS / NEXT SONG CONTROL -
When playing locally via BT connection or USB, the corresponding buttons on the
front panel of the ELIZA speaker, and the corresponding button on the remote
control can also control the music.
1. Short press the Play/Stop button to play music or pause playback.
2. Press the Previous/Next button briefly to play the previous or next song.
3. Press the Previous/Next button to rewind or fast forward. (Only for USB local
playback).
STANDBY MODE -
If the ELIZA is not used for 30 minutes, the audio will enter standby mode to save
power. All indicators will be off in this mode.
1. Press and hold the Power/Mode button for more than a second to wake up the
speaker from standby mode.
USER GUIDE
ASHDOWN ENGINEERING - ELIZA
SAFETY WARNING
IMPORTANT SAFETY INFORMATION -
1. Please read this manual carefully and keep for future reference.
2. Please use the accessories specified by the manufacturer.
3. Please follow the connection instructions in the manual for proper installation.
4. It is recommended to use this product in an environment of 0-35 °C.
5. To reduce the risk of fire and electric shock, do not expose this product to rain or
moisture.
6. Do not use the product near water or splash the product into any liquid or drip or splash
any liquid onto the product.
7. Do not install and use the product near any heat source (such as radiators, heating
equipment, stoves or other heat generating equipment).
8. Do not place any water-filled appliance, such as a vase, on top of the product.
9. Do not place any kind of open flame on the product, such as a lighted candle.
10. Do not block the openings of the product, or insert objects into the openings or gaps of
the product, as doing so may pose a risk of fire or electric shock.
11. Please leave enough space around the product so that good ventilation can be
maintained (5cm or more is recommended).
12. Do not force the plug into the port, check that the port is not blocked, that the plug and
port match and that the orientation is correct before connecting.
13. To prevent children from accidental ingestion, place the provided accessories out of
reach of children.
14. Do not open or remove the housing for maintenance as this may expose you to
dangerous voltages or cause other hazards.
15. No matter if the product is damaged for any reason, it must be repaired by professional
USER GUIDE