WIMIUS K1 Manual Del Usuario página 16

How to Use WiFi Settings
Select the settings icon in the upper right corner of the main interface, and then
press the "OK" key on the remote control to enter the settings interface and
select "WiFi Setting".
For IOS System
Setting with Home Wi-Fi
Attention: Your device and the projector should be in the same Home
WiFi.
1.Turn on the WiFi Setting of projector.
2.Choose your Home WiFi to connect and enter the right password, then click
"Done"to Connect, please wait 3-5 seconds to establish the connection. Once
connected, it will remember the password of the connected WiFi.
3.Turn on the WiFi setting of your IOS mobile device, then connect it the same
Home WiFi as the projector.
4.Then click"IOS Cast"
5.Swipe up the screen of your iOS mobile device and tap "Screen Mirroring" to
search for the projector, then select"WiMiUS-K1Projector"from the searching
results to connect.
6.Succeed.
as the Input Source of your projector.
iOS Cast
12
EN
support@wimius.com