Iluminarc LOGIC Wall Panel Expand Kit8 Instrucciones De Instalación página 3

About this Guide
These Installation Instructions include important information about the installation of the LΩGIC Wall Panel Expand Kit8.
Safety Notes
• Power must be turned off and disconnected when working inside the LΩGIC Wall Panel 16-Port.
• This product must be installed by a qualified and competent electrician.
• Observe all safety measures during installation (no metal jewelry, utilize a grounding mat, etc.).
What is Included
• 8-port POE output board
• Power supply
• DIN rail breaker
Product Overview
Installation Instructions
Do the following to install the LΩGIC Wall Panel Expand Kit8 in the LΩGIC Wall Panel 16-Port:
Step 1
1. Unplug the LΩGIC Wall Panel 16-Port from power.
2. Open the front panel of the LΩGIC Wall Panel 16-Port.
3. Use a #2 Phillips-head screwdriver and a 2.5 mm hex wrench to remove the indicated screws.
LΩGIC Wall Panel Expand Kit8 Installation Instructions Rev. 1
INSTALLATION INSTRUCTIONS
DIN rail breaker
Power supply
with screws
• 6 output board screws
• 4 power supply screws
• Ribbon cable
Ribbon cable
8-port POE
(Power Over Ethernet)
output board
with screws
EN
1