Iluminarc LOGIC Wall Panel Expand Kit8 Instrucciones De Instalación página 5

Step 3
1. Use a #2 Phillips-head screwdriver to install the 8-port POE output board with the 6 screws.
8-port POE output board
(in the first Expand Kit slot)
2. Use a #2 Phillips-head screwdriver to install the output board power cables.
• Connect the black cables to the terminals marked "-".
• Connect the red cables to the terminals marked "+".
LΩGIC Wall Panel Expand Kit8 Installation Instructions Rev. 1
INSTALLATION INSTRUCTIONS
Master control board
EN
3