Iluminarc LOGIC Wall Panel Expand Kit8 Instrucciones De Instalación página 7

Step 5
1. Use a #2 Phillips-head screwdriver to install the power supply with the 4 screws.
2. Use a #2 Phillips-head screwdriver to install the AC power cables on the left of the power supply.
• Connect the white cable to the terminal marked "AC/N".
• Connect the black cable to the terminal marked "AC/L".
• Connect the Yellow/Green cable to the terminal marked "FG".
3. Use a #2 Phillips-head screwdriver to install the DC output cables on the right of the power supply.
• Connect the black cables to the terminals marked "-V".
• Connect the red cables to the terminals marked "+V".
LΩGIC Wall Panel Expand Kit8 Installation Instructions Rev. 1
INSTALLATION INSTRUCTIONS
EN
5