Alecto BFT-66 Manual página 4

4. Commissioning/preparations
AFTER PURCHASE:
• Immediately after purchase, check with the overview drawing (see chapter 2.1. APPLIANCE AND ACCESSORIES) whether the BFP-66 is supplied with all
accessories. Please contact your supplier if anything is missing.
• Make sure the BFP-66 is undamaged, including the power cord. If in doubt, consult your supplier or the Alecto service department. Website:
www.alectobaby.nl or email: service@alectobaby.nl
• Remove all accessories from the packaging and check for damage.
BEFORE FIRST USE:
• Remove all packing materials from the appliance and accessories.
• Clean all parts thoroughly before rst use. See chapter 6. CLEANING AND MAINTENANCE.
BEFORE EACH USE:
• Place the appliance on a rm and at surface and keep enough space around the appliance to avoid any damage to kitchen cupboards (e.g. due to the hot
steam) and you can hold the appliance rmly when blending.
• Do not plug in the power cord until all preparations for steaming, heating, blending/pureeing and sterilizing have been completed.
5. General
5.1 Assembly and disassembly
Removing the jug from the base
Removing the lid from the jug
Removing the lid from the water tank
Removing the blade unit from the jug
1 2
3
Caution Sharp blades.
Handle with care when attaching or removing
Attaching the jug to the base
Attaching the lid to the jug
Attaching the lid to the water tank
Attaching the blade unit to the jug
1
2 3