Descargar Imprimir esta página

Electrolux EIT81443 Manual De Instrucciones página 33

Ocultar thumbs Ver también para EIT81443:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

5.12 Power limitation
Originally the hob is at its highest possible
power level.
To decrease or increase the power level:
1. Deactivate the hob.
2. Touch
for 3 seconds. The display
comes on and goes off.
3. Touch
for 3 seconds.
on.
4. Touch
. P72 comes on.
5. Touch
/
of the Timer to set the
power level.
Power levels
Refer to "Technical data" chapter.
• P72 — 7200 W
• P15 — 1500 W
• P20 — 2000 W
• P25 — 2500 W
• P30 — 3000 W
• P35 — 3500 W
• P40 — 4000 W
• P45 — 4500 W
• P50 — 5000 W
• P60 — 6000 W
CAUTION!
Make sure that the selected power fits
the house installation fuses.
5.13 Power management
• Cooking zones are grouped according to
the location and number of the phases in
the hob. See the illustration.
• Each phase has a maximum electricity
loading of 3600 W.
• The function divides the power between
cooking zones connected to the same
phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds
3600 W.
• The function decreases the power to the
other cooking zones connected to the
same phase.
• The heat setting display of the reduced
zones alternates between the chosen heat
setting and the reduced heat setting. After
some time the heat setting display of the
Power management with Power limitation
When you set the Power limitation function to
6000 W or less, power of the hob is divided
between all cooking zones.
or
comes
When you set the Power limitation function to
more than 6000 W, the power of the hob is
divided between its left and right side.
5.14 Hob²Hood
It is an advanced automatic function which
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on basis of mode setting and
temperature of the hottest cookware on the
hob. You can also operate the fan from the
hob manually.
For most of the hoods the remote system
is originally deactivated. Activate it before
you use the function. For more
information refer to hood user manual.
reduced zones stays on the reduced heat
setting.
ENGLISH
33

Publicidad

loading