Publicidad
Idiomas disponibles
Idiomas disponibles
English
3 - Product description
1
Power supply input
+ DMX
Connects the projector to the mains via a hybrid power supply +
DMX cord on a molded plug.
CAUTION !
This appliance must be connected by a
qualified technician in accordance with the
regulations in force. This device is class 1
and must be earthed.
Power supply :
Make sure that the voltage of the place of service corresponds to
the instructions noted on the product.
2
Power supply output + DMX
Used to connect a projector at the output via the hybrid power
supply + DMX cable. Please respect the output power limits of
the projector see chapter 6. If no projector is connected at the
output please use the plug provided.
3
Suspension Bracket
Allows you to hang or place on the ground and to direct the
projector.
Page 22
VPANEL-200RGBL -
DMX/POWER IN
AC 100-240V 50/60Hz
FUSE: T3A/250V 200W
1
IP66 architectural projector with 24 LEDs 20W 4in1 RGBL
6
architectural-lighting.eu
Distributed by HITMUSIC SAS
FRANCE
MADE IN CHINA
4
Suspension bracket clamping system
Allows you to adjust the tilt and lock the position of the projector.
5
Safety ring
Connect a double safety sling to this ring.
requires each device to have a double safety hook. This
security system must support 10 times the weight of the
device so you must provide a sling capable of supporting at
least 150 kg minimum.
6
Decompression valve
This valve automatically balances the pressure in the projector
and thus eliminates the risk of water infiltration by suction.
Please do not obstruct this valve.
DMX/POWER OUT
MAX: 10A
2
CAUTION !
Make sure the attachment point is properly
tightened.
It is mandatory to install a safety sling.
When installing in a public place, legislation
5
4
3
Publicidad
