Contest VERSATILE COLOR CPANEL-200RGBL Guia Del Usuario página 23

VPANEL-200RGBL -
4 - Attaching the bracket and aiming the projector
144 mm
The projector can be fixed on a suitable flat surface using three attachment points A C C. The notch B is used to lock the rotation of the projec-
tor in Pan over 180°.
Temporary hanging is possible using two clamps fixed through the external holes C.
CAUTION !
Ensure that the anchor points are properly tightened. Use 12mm stainless screws and check the solidity of the
support. It is mandatory to install a safety sling. When installing in a public place, legislation requires each device
to have a double safety hook. This security system must support 10 times the weight of the device so you must
provide a sling capable of supporting at least 150 kg.
To choose the tilt angle of your projector: loosen the central screw using a 6mm Allen key and
rotate the projector. The notched clamping part allows the projector to be positioned permanently
and the marking of the angles provides information on the direction of the beam (see figure
opposite).
5 - Spoiler assembly
The spoiler is supplied in the device packaging. It is fixed using 7 screws on the front of the projector.
IP66 architectural projector with 24 LEDs 20W 4in1 RGBL
C
13 mm
234 mm
A
180°
13 mm
B
462 mm
C
13 mm
English
Page 23