Publicidad
Idiomas disponibles
Idiomas disponibles
English
7 - Setting setting
VPANEL-200RGBL projector is configured using the remote RDM control box VRDM-CONTROL. This box makes it possible to deport the control part of
the projector in order to make all the adjustments (settings) of the projector via the DMX cord by RDM protocol.
The menu is different depending on the type of projector, the functions are as follows:
VRDM-CONTROL
MENU
RDM
Products List
Page 28
VPANEL-200RGBL -
Label:
''Product Name''
Model:
''Product Name''
Manufacturer:
Hitmusic SAS
Firmware:
V1.00
DMX Address:
001 (XXX)
DMX Personality:
CH list
DMX Slots:
ON (By default)
Identify:
OFF
Temperature:
...
NO DMX
Slave mode
Stand-Alone Mode
Edit USER Macro
Fixture Menu
Setting Mode
IP66 architectural projector with 24 LEDs 20W 4in1 RGBL
The name of the product connected to the box
The name of the product connected to the box
The name of the manufacturer
Firmware version
DMX address 001 start (XXX) end
Number of used channels
Allows you to flash the selected projector in order to
identify it among the other projectors
Internal temperature of the projector
Blackout
Freeze (By default)
Stand-Alone
Single
Master
Slave (By default)
Master Dimmer
Flash
Custom color
Macro
USER macro
Play Time
Play Fade
Edit Step NB
Edit Steps
Dimmer curves
Flip Mode
White Balance
PWM Frequency
Temperature
Time info
DFSET
Values from 000 to 255
Values from 000 to 255
Red
Green
Blue
Lime
Presets/Macro
Fade Speed
Time 00-99
Fade 00-99
Step NB 01-20
Edit Step 1 to 20
Red
Green
Blue
Lime
Linear
Exponential (By default)
Logarithmic
S-Curve
Yes
No (By default)
Red
Green
Blue
Lime
900Hz
1200Hz (By default)
2400Hz
3600Hz
°C (By default)
°F
...
OFF
ON
Publicidad
