AgfaPhoto Realishot VLG-4K Manual De Usuario página 6

EN
5) Press the Up or Down Button to switch
between languages, and press the Mode/OK
Button to confirm your selected language.
6) Press the MENU Button to exit the menu
without making a selection.
Date Format
This function allows you to set the current
Date and Time on your recorded video clips and
captured photos.
1) In Photo Mode press the MENU button.
2) Press Up or Down Button to Select the Gear
Icon.
3) Press the Right Button to enter the setup
menu.
4) Select 'Date Format' using the Up or Down
Button and press the Mode/OK button to enter
the 'Date Format' menu.
5) Press the Up or Down Button to navigate
the menu, and press the Mode/OK button to
confirm your selected option.
6) Press the MENU Button to exit the menu
without making a selection
Note: If there is no date and time for the photos
or videos taken, please find the "time watermark"
in the menu settings of taking photos and videos
and press the Mode/0K button to select on or off.
Flashlight Button
In Photo Mode, press Up Button to switch back
and forth between "Flash On" "Flash Off" and
"Auto Flash".
Flash On : When taking the photo, always
flash.
Flash Off : No flash when taking photos.
6
Auto Flash : According to the environment
around, flash automatically.
Note: The flash does not work in video mode.
CAMERA AND COMPUTER
CONNECTION
After connecting the camera to a computer with
a USB cable, the "Charging Mode" /"Mass Storage
Mode" /"PC Camera" options appears on the
screen. Press the up and Down Button to select,
and press the Mode/OK Button to confirm the
selection.
• MSDC(Storage): Select Mass storage mode, and
find the related drive in the computer to review
photos and videos.
• PC camera: Choose PC Camera on display, press
the Mode/OK Button to select. The camera
could become a PC camera.
Note: If the PC camera can not be found on the
computer, please open Skype or another similar
application to test if the PC camera is available
to use.
USE AN EXTERNAL
MICROPHONE
The camera only supports the external
microphone that comes with the factory.
If the purchased camera is equipped with
a microphone, insert the battery into the
microphone according to the correct positive
and negative poles and turn on the microphone
switch, the indicator light will be on. Then plug the
microphone into the headset port of the camera's
external microphone, and start recording with the
external microphone used for recording.