AgfaPhoto Realishot VLG-4K Manual De Usuario página 7

TRIPOD
CAMERA INSTALLATION
Align the nut hole of the camera with the screw
post of the tripod and insert it, turn the wheel
and tighten it.
Turn the wheel
to tighten.
CAMERA ANGLE ADJUSTMENT
Press and hold the Vertical Adjustment
Button and push the head of tripod.
(The adjustable angle is about 135 degrees).
CAMERA DIRECTION ADJUSTMENT
Press and hold the Horizontal Adjustment
Button
(Adjustable angle 360 degrees).
Align the
camera nut
hole with this
screw post.
INSTALLATION OF EXTENSION BRACKET
As shown in the picture below, insert the
extension bracket to install it. If it needs to be
disassembled, just pull it out in the opposite
direction (it can be installed in four directions).
, turn the head of tripod.
EN
7