Ferroli RIMINI DP Serie Instrucciones De Instalación, Uso Y Mantenimiento página 50

RIMINI DP
- The heater must not be located immediately below a sock-
et-outlet.
- This heater is filled with a precise quantity of special oil.
Repairs requiring opening of the oil container are only to be
made by the manufacturer or his service agent who should
be contacted if there is an oil leakage.
- When scrapping the heater, follow the regulations concern-
ing the disposal of oil.
- The heater must be installed so that around it there is suffi-
cient space for correct circulation of hot air, always respect-
ing the minimum distances indicated in the LOCATION sec-
tion.
- The heater must be installed so that switches and other
controls cannot be touched by a person in the bath or show-
er, respecting 0.6 m distance between the emitter and the
bath or shower.
- If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
- Mounting is an important part of safety. To perform the cor-
rect installation, go to MOUNTING section.
- Do not use this heater in the immediate surroundings of a
bath, a shower or a swimming pool.
- Do not use this heater if it has been dropped.
- Do not use this heater if there are visible signs of damage
to it.
EN
50 A73021554