Ferroli RIMINI DP Serie Instrucciones De Instalación, Uso Y Mantenimiento página 60

Each half hour is indicated with 2 rectangles:
2 black rectangles
-
1 black rectangle + 1 white rectangle
-
2 white rectangles
-
Inside the circle the selected half hour and the set point temperature of that half hour are
To change the mode of each interval, touch the mode key; it switches between comfort, eco
and anti-frost. To move to the next or previous interval, touch
The time, circle interval and mode symbol are flashing on the screen. By touching the OK key,
the current program is saved and it goes forward to the next day. By touching and holding the
OK key the program of the current day is copied to the next day or days. After day 7, when
confirming with OK key, it exits the program edition, returning to the mode in which it was.
To finish editing the program edition at any time, touch and hold the mode key for 2.5 seconds.
5.6. Forced or absence mode
The forced or absence mode allows the user to manually operate the emitter, forcing the emitter
to heat or not heat for a set time, so that after that time the emitter automatically returns to the
last selected mode.
This function is intended when the thermal emitter is used in Program mode and, in the event of
an unforeseen event or a specific need, you want to force the emitter to heat up to a specific
temperature, or not to heat, without having to change the programming.
To enter this function, touch the hand key.
Firstly, using the
the emitter to heat or not. The edition is circular, from half an hour to 365
days. The steps are:
To confirm the time required, the OK key will be touched, and you will go to
the temperature selection or heating off.
The desired temperature can then be set with the
30 °C, in steps of 0.5 °C, can be entered. Unheated mode can be entered
from either 7°C or 30 °C by entering
Unheated is indicated by the standby symbol and 4 dashes on the screen (----).
60
displayed. In the upper right corner, the symbol corresponding to the
selected mode for the half hour active interval is displayed.
For example:
00-00:30 indicates from 00:00 to 00:30.
00:30-01 indicates from 00:30 to 01:00.
and
Half an hour
-
1 hour
-
1 day
-
= Comfort
= Economy
= Anti-frost
or
keys enter the amount of time you want to force
-- from 00:30 to 12:00
-- from 12:00 to 1 d
-- from 1 d to 365 d
or keys once from each extreme.
EN
RIMINI DP
respectively.
and keys, from 7 °C to
A73021554