EGO Commercial HTX5300-PA Manual Del Operador página 37

Cutting Overhead (Fig. 14a & 14b)
1. Set the cutting blades completely to a suitable angle.
2. Hold the hedge trimmer and slowly swing it in an arc to make maximum use of its
reach.
WARNING:
Any overhead working position is tiring. To minimize the risk of
accidents, work in such positions for short periods only. Set the angle of the blades
to maximum so that the machine can be held in a lower, less tiring position while still
providing adequate reach.
14a 14b
37
56-VOLT LITHIUM-ION COMMERCIAL 21" ARTICULATING POLE HEDGE TRIMMER — HTX5300-PA/HTX5300-PA-FC