Suncast BMADWR1 Instrucciones De Armado página 8

Pre-Assembly - Drawer Glides
Separate one small drawer glide ( J) into 2 parts, the wide base and the narrow
glide:
1) Extend the narrow glide fully.
2) Lift upward on the glide catch.
3) With glide catch in raised position,
slide the narrow glide out from the wide base.
Repeat for the remaining small drawer glide ( J).
Using 6 screws total ( K), install 1 narrow glide onto each side of the small drawer ( S).
IMPORTANT: The closed end of the narrow glide must face the drawer front (R).
8