Safety Warnings - Makita EM403MP Manual De Instrucciones

SAFETY WARNINGS

Brushcutter safety warnings
WARNING:
Read all safety warnings,
instructions, illustrations and specifications
provided with this machine. Failure to follow all
instructions listed below may result in fire and/or
serious injury to the operator and/or bystanders.
Save all warnings and instruc-
tions for future reference.
The term "brushcutter" and "machine" in the
warnings and precautions refer to the combina-
tion of the attachment and the power unit.
The term "motor" in the warnings and precautions
refers to the engine or electric motor of the power unit.
General safety
First-time or inexperienced operator
1.
should ask the dealer for training in all
operation of the machine. Never allow chil-
dren, persons with reduced physical, sen-
sory or mental capabilities or lack of expe-
rience and knowledge or people unfamiliar
with the instructions to use the machine.
2. It is recommended only to lend the
machine to people who have proven to
be experienced. Always hand over the
instruction manual.
3. Stay alert, watch what you are doing and
use common sense when operating the
machine. Do not use the machine while
you are tired, ill, or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating the machine
may result in serious personal injury.
4. Avoid using the machine in bad weather
conditions especially when there is a
risk of lightning.
5. Follow your national and local regulation
for use of outdoor power machines.
Intended use of machine
This machine is only intended for cutting
grass, weeds, bushes and undergrowth.
Never use the machine for any other purpose
such as edging or hedge cutting. Use for unin-
tended purpose may result in serious injury.
Personal protective equipment
Always wear heavy, long pants, sturdy
1.
boots, gloves, and a long-sleeve shirt.
Do not wear loose clothing, jewelry,
short pants, sandals, or go barefoot.
Secure hair so it is above shoulder level.
2. Always wear a helmet where there is a
risk of falling objects.
3. Always wear protective goggles to pro-
tect your eyes from injury when using
power tools.The goggles must comply
with ANSI Z87.1 in the USA, EN 166 in
Europe, or AS/NZS 1336 in Australia/New
Zealand. In Australia/New Zealand, it is
legally required to wear a face shield to
protect your face, too.
It is an employer's responsibility to
enforce the use of appropriate safety
protective equipments by the tool opera-
tors and by other persons in the immedi-
ate working area.
4. Always wear ear protection, such as ear
muffs. Exposure to noise can cause hear-
ing loss.
Always wear sturdy shoes with a non-
5.
slip sole. This protects your feet against
injuries and ensures a good footing.
Preparation before use
Before use, always check the machine is
1.
safe for operation:
— Check for fuel leaks.
Make sure all fasteners are in place
—
and secure.
— Replace damaged parts.
Make sure the cutting tool is prop-
—
erly installed and securely fastened.
— Make sure the cutting tool guard is
properly attached in the position as
described in this manual.
— Check the throttle trigger, lock-off
lever and other control switch for
smooth action and proper function.
— Clean the handles for proper control
of the machine.
— Make sure the handles are installed
as described in this manual.
Failure to follow those instruction may
cause serious injury.
3 ENGLISH