Aquaglide FIGURE 8 Manual Del Propietário página 7

5. Confirm that suitable anchor(s) and mooring lines are in place before launching this item (see Anchoring).
6. To launch product, lift completely and place in water. Large items may require many extra people to
accomplish this. Never drag product as damage may occur.
7. When connecting multiple items together, always follow manufacturer's recommendations. Use only
Aquaglide Two-Step Vario-lock cinch straps and connecting rings. Make sure connection is tight and there is
NO GAP between items. Failure to connect items properly may result in injury or death. See D1 - D6.
a. Attach straps to 'Boarding Features' (example: Swimstep, Splashmat, Speedway, Breezeway or Deck)
where a connection is required. Boarding Features should not be attached to other Boarding Features.
b. Use all available rings to make connection. Standard connections use 5 rings. Some items use 3 or
occasionally 7 rings/ straps. FIGURE 8 is a Track Feature item with 5-ring connections on 2 ends.
c. Float 'Boarding Feature' into desired position. Note: a matching set of connecting rings is required on
feature item.
d. Attach center strap to center ring on feature item. Connect loosely, then work outward until all straps are
connected.
e. Dive beneath to tighten all straps securely. Dive mask and several attempts may be required.
D-1
D-4
7
D-2
D-5
D-3
D-6
www.aquaglide.com