CASO DESIGN Crema Glas Manual Del Usuario página 25

19.2 Delivery scope and transport
inspection
As a rule, the Crema Glas is delivered with the
following components:
 Jug
Base unit
 2 whisks for frothing (one at the bottom side of the
base unit (A))
 1 whisk for heating (at the bottom side of the base
 Operating Instructions
unit (B))
PLEASE NOTE
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.
19.3 Unpacking
Unpack your device as follows:
 Take out the device from the box and remove the interior and exterior packaging.
 Clean the appliance thoroughly before the first use. (see chapter Cleaning and
maintenance)
19.4 Disposal of the packaging
The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and
recycling-related points of view and can therefore be recycled.
Returning the packaging back to the material loop saves raw materials and reduces the
quantities of accumulated waste.
Take any packaging materials that are no longer required to "Green Dot" recycling
collection points for disposal.
PLEASE NOTE
► If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event
of a guarantee claim.
19.5 Setup location requirements:
 In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfil the following prerequisites:
 The device must be set up on a firm, flat, horizontal surface with sufficient load-bearing
capacity.
Caso Crema Glas 25