ENAR SPYDER E-BATT Serie Manual De Instrucciones página 21

2.2 BATTERY DESCRIPTION
The rechargeable Li-Ion battery is removable, ENAR code 81100. It is mounted inside the casing
which protects it against shocks and humidity.
To remove the battery from the converter, press the red pusher upwards. This opens the door, then
pull out the handle on the battery.
2.3 CHARGER DESCRIPTION
The SPYDER E-BATT charger has a connector for the battery and a cable with a plug that connects
the charger to the mains.
It includes a LED indicator by which the user can check the state ot the charge, red when charging
and green when the battery is fully charged.
The charger can be used from 100V to 240V. Use the appropriate plug for the available socket of the
mains.
Insert the charger connector completely into the battery.
The battery charge is 67,2V and 4Ah. If the battery is fully discharged, it takes 1 hour and 30 minutes
to fully charge.
Use only indoors, do not expose the charger to humidity.
ATTENTION! Use only the charger 104519.
CHARGER CONNECTOR (2)
BATTERY STATUS LED
en
POWER CABLE WITH
SCHUKO PLUG (1)
WARNING! If the converter is not going to be used, charge the battery every 3 months.
BATTERY POWERED ELECTRONIC CONVERTER
SPYDER E-BATT
5