Warning Labels On The Machine; Símbols On The Machine - STERWINS PCS 46 Manual De Instrucciones

WARNING LABELS ON THE MACHINE

(1) Read owner's manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Use the chain saw with two hands.
(4) Warning! Kickback it's danger.
(5) Warning/Attention.
Never remodel the product. We won't warrant the machine, if you use the remodeled
product or you don't observe the proper usage written in the manual.
SYMBOLS ON THE MACHINE
For safe operation and maintenance, symbols are carved in relief on the machine.
According to these indications, please be careful not to take a mistake.
(a).The port to refuel the "MIXGASOLINE" Position: fuel tank cap
(b).The port to refuel the "CHAIN OIL" Position: oil cap
(c).The indication regarding the switch. Flipping the engine switch to the "O"(STOP)
direction, the engine stops. Position: rear-left of the unit
(d).The indication regarding the air level. Pulling out the air level, this will close.
Position: rear-right of the unit
(e). The indication regarding the chain oil adjuster screw. "MIN" direction-the oil flow
decrease
"MAX" direction-the oil flow increase. Position: bottom of the clutch side
(f).The position of H-needle
The position of L-needle. The position of idle adjusting screw. Position: rear-left of the
unit
26