universalblue UCC2000-18 Manual De Instrucciones página 14

3. OPERATING THE HEATER
This appliance can work in 4 different positions, as it follows:
SYMBOL
0 OFF
*
I HOT AIR MEDIUM FLOW (1000W)
II HOT AIR MAXIMUM FLOW (2000W)
With the thermostat knob, you can set the air temperature. Once the
heater reaches the desire temperature, the thermostat will maintain
the temperature by activating or deactivating the heater.
It is recommended to select the maximum flow rate and set the
thermostat as much as possible to heat the room quickly. Once the
room reaches the proper temperature, select a lower setting to
reduce power consumption and prevent the room from getting too
hot.
Please consider that in case of cold weather, a low power setting
may be not enough. Select a higher setting for this particular period.
Before disconnecting the appliance it is recommended to keep it on
for 5 or 10 seconds with cold air.
This heater comes equipped with an anti-tilt safety control that will
cut off the power automatically in the event of an accidental fall.
4. CLEANING AND MAINTENANCE
This product does not require a big maintenance work. To clean it,
please follow the following notes:
• Unplug the heater first and wait until it cools completely.
• Use only a soft damp cloth and dry later.
• Do not use abrasive cleaning products.
FUNCTION
COOLING AIR
14