Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
A licensed electrician must install all
electrical connections. The connections
must be in accordance with national
legislation.
Make sure that the power supply complies
with the power rating indicated on the
product label
.
Only by an authorized and
qualified person must connect
the product to the power supply.
The warranty period for the
product begins after its proper
installation. The warranty will cease to be
valid if this rule is followed.
The power cable must not be held, bent,
trapped, or come into contact with the
hot parts of the product. A licensed
professional must replace the damaged
power cord. Otherwise, there is a risk of
electric shock, short circuit or fire.
Before starting any work on the
electrical
disconnect the product from
the system. There is a risk of
electric
installation, the power cord plug must be
easy to reach (do not place it above the
hob).
Oven installation
Align the oven with the space where you
want to place it in, and secure it with the
screws provided so that the power cord is
not trapped and/or broken. See picture 03
on page 04.
Final check
• Plug in the power cord and light the
product fuse.
• Check that the oven turns on and works
properly. .
• Check the the product for any damage
before its transportation.
26
installation,
shock.After
the
CONTROL PANEL
In order to get familiar with the control
panel of your oven, please see picture 05 on
page 05.
11. Function or program selection Knob/
Wheel
12. Timer Knob/Wheel
13. Temperature selection Knob/Wheel.
FUNCTION MODE
First use
Before using the oven for the first time,
please read the instructions below:
• Remove all baking trays and the grid.
• Set the temperature to the maximum
level.
• Set the function knob to LOWER and
UPPER (and if possible, + FAN).
• Leave it on for 30 minutes.
• During this process, the oven may emit
odor and smoke. Do not worry; this
is normal during the first use. Before
adding any food, wait until the smell or
smoke has disappeared.
• Repeat this process for the grill
function.
• When these processes are finished,
use a soft, slightly damp cloth to clean
the inside of the oven and dry it with
another cloth.
Before using the oven for the
first time, carefully rinse the
accessories, such as baking
trays and the grid.
Mode operation
Hot surfaces cause burns!
Always pull from the middle
section of the handle to open
the door of the oven. See picture
04 on page 04.
Publicidad
