will be saved for the next time you
use it. You can check these settings
by pressing the switch again.
Winter function:
This option involves reversing the blades
to distribute the hot air that accumulates
against the ceiling, allowing continued use
of your fan throughout the year.
To use this function simply press the
remote control button.
CLEANING AND MAINTENANCE
This product does not require a great deal
of maintenance. To clean, please follow the
instructions below:
• Unplug the fan first and wait until it
comes to a complete stop.
• Use only a soft damp cloth.
• Do not use abrasive cleaners.
• If you are not going to use the fan
for some time, it is recommended to
remove the batteries from the remote
control and store it in a clean and dry
place.
TROUBLE SHOOTING
Occasionally you can solve yourself some
failures in your appliance. Check the
Problem-Solution chart included in this
manual. See table 02 on page 12.
Otherwise, please contact our Customer
service.
If you notice any failure you cannot fix
yourself and it´s preventing you from using
the appliance, disconnect it from the power
supply.
Any repairing intervention or
replacement of electrical cables
must be carried out by a skilled
and
Otherwise it could be very
dangerous.
competent technician.
Reprogramming the remote controller:
Once you have finished the installation,
assembly and electric connection of your
fan, check that the remote control interacts
correctly with the fan, if it does not it is
possible that the remote controller needs
to be reset.
To reset your remote controller, please
follow these steps (see picture 09 on page
11):
• Step 01-A: Switch off the main power
and make sure fan has completely
stopped. Install a New receiver or install
the battery in a new transmitter before
the Pairing Process, if is necessary.
• Step 02-B: Switch on the power again.
• Step 03-C: Press and hold the button"FAN
ON/OFF" for over 3 seconds until the
Receiver "Long Beeps".:
REPAIR AND SPARE PARTS SERVICE
All original spare parts relevant for
the correct operation of the appliance
according to the regulation concerning
sustainable
design
through our After Sales Service for at
least 10 years from the date the appliance
was introduced in the market within the .
European Economic Area.
ENVIRONMENTAL INFORMATION
This appliance is labelled in
compliance with European
directive 2012/19/EU for Waste
Electrical
Equipment
ensuring that this appliance is
disposed of correctly, you will help prevent
any possible damage to the environment
and to human health, which might
otherwise be caused if it were disposed of
in the wrong way.
The symbol on the product indicates that
it may not be treated as normal household
waste. It should be taken to a collection
point for the recycling of electrical and
electronic goods.
EN
will
be
available
and
Electronic
(WEEE).
By
37