Packard Bell DVD DIVX 450 PRO Guia Del Usuario página 9

Audio setup
Audio out
Selects an audio output mode: Analogue, SPDIF/RAW or SPDIF/
PCM.
Notes:
1. This unit supports both Dolby digital or analogue audio.
2. If your unit doesn't support DTS mode, you should select SPDIF/
RAW or SPDIF/PCM to play DTS discs.
3. Some models support Dolby AC-3 and DTS. The unit sets the cor-
responding mode automatically.
OP Mode
Switch between RF and Line Out mode.
Dual Mono
If your amplifier/decoder already supports Dolby Digital output, you
can select Stereo, L-mono, R-mono, MIX-mono for your amplifier/
decoder.
Compression
To adjust the sound dynamic range.
LPCM output
You can select 48k or 96k audio encoding modes.
Preferences setup
Not accessible during display. The Preferences page includes TV
display, TV type, Audio, Subtitle, Disc menu, Local, Parental,
Password and Defaults.
TV display
If you have a widescreen TV (16:9 Aspect Ratio) select WIDE. Use
one of the NORMAL options for any other screen type.
TV Type
The preferred setting in most European countries is PAL.
Audio
Select your preferred language.
Subtitle
Select your preferred language.
Disc menu
Select your preferred language.
Locale
Select GBR for European countries.
Parental
Select a level of Parental lock.
SmartNAVI
Select navigation with of without a menu.
9 -
Defaults
Use this option to restore default settings.
Password
The default password is 2001 . You can change it using this option.
MP3 P
LAYBACK
One MP3 disc can contain up to 10 hours of music.
The directory and play mode will only display when SMART NAVI in
the Preferences page is set as WITH MENU.
1. Use the direction buttons and OK to browse through the menu.
2. To go back to a higher-level menu, press the folder icon.
When display is in stop mode, you can use the Repeat and Random
buttons to select a display mode.
3. Programmed playback
> Press the Program button to enter Program mode.
> Use the Numeric buttons to select tracks. When finished, press
Stop .
> Press the Play button to play the program.
> Set another play mode to exit programmed playback.
P CD P
ICTURE LAYBACK
Playback modes
Normal
When a directory is selected in the play mode window, each picture
in the current directory will be displayed consecutively in a slide
show fashion and will be scaled to fit in the TV screen. Twelve slide
show transition modes are provided. Use the PBC button to select:
Mode 0: no special transition effect (by default)
Mode 1: wipe from top to bottom
Mode 2: wipe from bottom to top
Mode 3: wipe from top/bottom to centre
Mode 4: wipe from centre to top/bottom
Mode 5: vertical blind
Mode 6: wipe from left to right
Mode 7: wipe from right to left
Mode 8: wipe from left/right to centre
Mode 9: wipe from centre to left/right
Mode 10: wipe from edge to centre
Mode 11: horizontal blinds
Mode 12: random
With the PBC button you can set transition effects for the slide
show. The last selection will remain in memory.
Press the Pause button to freeze display and the Next
Previous buttons to browse through pictures. To resume the slide
show, press the Enter/OK or Play button.
or