Fein ABLK18-1.3CSE AS Serie Instrucciones De Uso página 15

Adjustments.
Before mounting or replacing application tools or accessories, remove the
WARNING
battery. This preventive safety measure rules out the danger of injuries
through accidental starting of the power tool.
Setting the cutting direction
(figure 4).
Unscrew the union nut approx. 3 turns.
Pull the die downward.
Turn the die in the cutting direction, then
push it up ensuring that the die engages in
the groove.
Tighten the union nut.
Fig. 4
Union nut
Die
3.
5.
en
15
1.
2.
3.
4.