cecotec ROCK'NCUT SHURIKEN STEEL Manual De Instrucciones página 9

- Do not wash the appliance in the dishwasher.
- Check the power cable regularly for visible damage. If the
power cable is damaged, it must be replaced by the Technical
Support Service of Cecotec or similar qualified personnel to
avoid risks.
- Do not carry the appliance by the cable. Make sure the cable
is not trapped or stepped on. Do not wind the cable around
the appliance and do not bend it.
- Do not let the cable hang over the edge of the working
surface or worktop.
- Strictly follow the instructions in this manual to avoid injury
or damage to the appliance.
- Be careful when handling the cutting disc, when using the
appliance, and during cleaning.
- Do not use accessories not provided or suggested by
Cecotec, as these could cause damage to the appliance or
result in hazards.
- Do not place the appliance on unstable surfaces. Always
place it on flat, dry, and stable surfaces.
- The appliance is designed for slicing cold cuts. Do not slice
hard, frozen, plastic-wrapped, or foil-wrapped ingredients,
bone-in meat, fruit with hard pits, etc.
- You can use the slicer to slice soft boneless meat, cheese,
bread, or vegetables.
- The appliance must be used with the sliding plate and fixing
element in place, unless it's not possible due to the size or
shape of the food.
- Make sure that the disc is properly fixed to the appliance.
The disc must always run at a constant speed and without
rubbing against the structure.
- To push the ingredients against the cutting disc, use only the
food pusher provided by Cecotec.
ROCK'NCUT SHURIKEN STEEL
9