HTS ECO-Skate MINI Manual Original página 19

and executed slowly. Excessive speeds pose a safety hazard
and can lead to damage to the device. Avoid abrupt loading!
Secure the load to be transported from rolling away and tipping
over when stationary.
Monitor the skate and the load during all movements so
that you can react in good time when problem arises.
The loaded skate must never be left unsupervised and can
only remain in the same position for a short period of time
(PU rollers max. 15 min). Warning: Roller deformation leads
to uneven running and higher starting resistances.
Ensure that the goods to be transported are adequately
secured during and after the transport process.
Only start the movements after you have ensured that all
persons have moved away from the danger area and that
the load can sit safely and stably on the transport trolley.
Make sure you always have control of the moving system.
Move the system with max. 2 km/h to ensure a short
stopping distance. The system is unbraked.
Do not make any abrupt changes of direction.
If you have to overcome a gradient, use a towing
vehicle with sufficient braking force.
Fix the skate to the machine if necessary.
If you are using a towing vehicle, make sure that the
steerable transport skate is not pulled out from under
the machine when starting off, or establish a fixed
connection with the goods to be transported.
If you only pull on the machine, make sure that
the tractor operator and the person on the tow
hitch are always in contact with each other.
The tow hitch with towing eye for attachment is only
intended for towing. If you must move backwards, you
should consider a special tow hitch if necessary.
Emergency procedure: Conduct a first-aid procedure
adequate to the injury and summon qualified medical
attendance as quickly as possible. Protect the injured
person from further harm and calm them down.
Storage and transport
Use appropriate lifting equipment for transportation.
The appliance must be stored in a dry
place and protected from frost.
Lock the device in a proper place to protect
it from unauthorised use.
Maintenance
Ensure that the warning signs are always in good working order.
Check all screw and plug-in connections and protective
equipment if firm and tightened properly and whether
all moving parts are running smooth whenever
the appliance is to be put into operation.
Have your device repaired only by qualified professional
staff using original spare parts.. This will ensure that
the safety of the power tool is maintained.
Insufficient maintenance and care can lead to
unforeseen accidents and injuries.
Keep the apparatus handle clean, dry and free of spilt oil or
grease. Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp cloth.
If needed, an exploded view of the tool can be ordered.
Please state the ten-digit No. as well as the machine type
printed on the label and order the drawing at HTS.
Disposal
Any damaged or disposed devices must be
delivered to appropriate collection centres.
Guarantee
Warranty period of 12 months applies to commercial use
and commences on the day of purchase of the device.
The guarantee does not cover any unauthorised use such as
appliance overloading, use of violence, damage as a result
of any unauthorised interference or caused by foreign items.
Failing to follow the operating and assembly instructions
and common wear are also not included in the guarantee.
EC DECLARATION OF
CONFORMITY
We declare under our sole responsibility that the
Transport Dollies HTS ECO-Skate®, to which this
declaration relates correspond to the relevant basic
safety and health requirements of Directives
2006/42/EC Guideline of Machines
For the relevant implementation of the safety and health
requirements mentioned in the Directives, the following
standards and/or technical specifcation(s) have been respected:
EN 349:1993+A1:2008
EN ISO 12100:2010
EN ISO 13857:2008
DIN EN ISO 9001:2015
ANSI - ASME B30.1-2015
Fellbach, 2021-07-06
Michael Koch / Managing Director
Maintenance of technical documentation:
HTS GmbH
Ringstr. 28, 70736 Fellbach, Germany
CE marking
EN | English
19