Sansui A-M7 Manual De Instrucciones página 7

Mic Mixing
Using a microphone, you can mix the sound from the microphone with
the sound of a program source (record or tape).
2. Plug the microphone into the MIC jack.
5. Adjust the volume, balance and tone controls.
TAPE-1 TAPE-2 AUX
Tone Controls
Stereo Balance
Tape Recording
Recording a program source
Sound of a program source such as a record or broadcast can be recorded
onto a tape deck connected to the TAPE REC terminals.
1s
*
2.
3.
Depress the input selector that corresponds to the program source
(broadcast or record) which is to be recorded.
When recording phonograph records, depress the PHONO switch;
when recording off the air, depress the TUNER switch; and when re-
cording sound from the component connected to the AUX terminals,
depress the AUX switch.
Start playing the program source.
Operate the tape deck and start recording.
Monitoring the recording
A recording can be monitored only on a 3-head type of tape deck in
which the recording and playback heads are separate. It is not possible
with a tape deck using a combind recording/playback head.
1.
2.
Depress the tape monitor switch on the tape deck to the TAPE posi-
tion.
Depress the TAPE-1 or TAPE-2 input selector switch in accordance
with the tape deck which is recording.
Program source
a ecner] | oct
= OC De) ; "=
=| |
Tape deck 1
Tape deck 2