Emc Compliance Declaration - Beurer BG 17 Manual De Instrucciones

This warranty gives you specific legal rights, and you may also have other rights which may vary from state
to state.
For more information regarding our product line in the USA, please visit: www.beurer.com
Distributed by:
Beurer North America LP
Hallandale Beach, FL 33009
www.beurer.com
Questions or comments? Call toll free 1-800-536-0366 or contact info@beurer.com
Made in China.

14. EMC Compliance Declaration

ELECTROMAGNETIC COMPATIBILITY INFORMATION
Table 1
For all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacture's declaration – electromagnetic emissions
The BG 17 is intended for use in the electromagnetic environment specified below.
The customer or the user of the BG 17 should assure that it is used in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Table 2
For all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacturer's declaration – electromagnetic immunity
The BG 17 is intended for use in the electromagnetic environment specified below. The customer or the
user of the BG 17 should assure that it is used in such an environment.
IMMUNITY test IEC 60601 test level Compliance level Electromagnetic environment – guidance
Electrostatic
± 6 kV contact
discharge (ESD)
± 8 kV air
IEC 61000-4-2
Power frequency
(50/60 Hz)
3 A/m
magnetic field
IEC 61000-4-8
Compliance Electromagnetic environment – guidance
The BG 17 uses RF energy only for its internal function. There-
Group 1 fore, its RF emissions are very low and are not likely to cause
any interference in nearby electronic equipment.
Class B
± 6 kV contact
± 8 kV air
3 A/m
Floors should be wood, concrete or ceramic
tile. If floors are covered with synthetic mate-
rial, the relative humidity should be at least
30 %.
Power frequency magnetic fields should be
at levels characteristic of a typical location
in a typical commercial or hospital environ-
ment.
14