Comunello LIWIN L40 Slim Instrucciones De Uso Y De Instalacion página 30

The command must:
1) be positioned at a minimum height of 1500 mm from the floor
2) be positioned in such a way that upon activation, the person in charge of opening/closing has all the moving parts within
their field of vision
.
Do not wash the appliance with solvents or water jets. Do not immerse the appliance in water. All repairs must be carried out by
qualified personnel (manufacturer or authorised service centre). Always and exclusively request the use of original spare parts.
Failure to use original spare parts could compromise correct operation of the product and the safety of persons and property,
also invalidating the benefits of the warranty that covers the appliance. In case of problems or uncertainties, contact the point
of sale where the product was purchased or the manufacturer directly.
The system must be frequently checked, in particular check the cables, hinges, safety arms and supports in general for any
imbalances and signs of wear or damage. Do not use if repair or adjustment is necessary, as installation failure or incorrect
automation balancing may lead to injury.
3. TECHNICAL DATA
3.1 TECHNICAL DATA TABLE AND CE MARKING
The CE marking certifies that the actuator complies with the essential health and safety requirements of the European product
directives. The CE marking can be identified by means of a dedicated adhesive plate applied externally to the product which
indicates some of the data in the table below:
TECHNICAL DATA
MAX TRACTION FORCE
PUSHED FORCE
POWER SUPPLY
FREQUENCY
TYPE OF SERVICE
NO LOAD SPEED
LOADED SPEED
AVAILABLE STROKES
TYPES OF OPENINGS
OPERATING TEMPERATURE
DEGREE OF IP PROTECTION
SOFT START/SOFT STOP
CURRENT ABSORPTION
POWER CONSUMPTION
CURRENT CONSUMPTION (IN
STAND-BY)**
ABSORBED POWER (IN STAND-
BY)**
OBSTACLE DETECTION
PARALLEL CONNECTION
SYNCHRONISATION
DIMENSIONS
CABLE
LIMIT SWITCH IN OPENING
LIMIT SWITCH IN CLOSING
STATIC RETENTION FORCE
ACTUATOR WEIGHT
COLORS
CODE
* See flow chart on page 7.
** Only in case of always powered.
30
LIWIN L40 slim
400 N*
400 N*
110/230 VAC
50/60 HZ
3 min ON - 7 min off
11mm/s
6mm/s
200-250-300-350 mm
400-500-550-600 mm
650-700-750-800 mm
850-900-950-1000 mm
TOP HUNG OUTWARD, BOTTOM
HUNG INWARD, HINGED, SKYLIGHT HUNG INWARD, HINGED, SKYLIGHT
DOMES, PANTOGRAPH
-5°C + 50°C
30
YES
0,40 A
42 W
-
-
CURRENT ABSORPTION
YES (MAX 30 ACTUATORS)
NO
26 X 41 X 563/688/788/888 mm
PVC 3x0.75 L=2500mm
ENCODER
AMPEROMETRIC
2200 N
1.210 Kg
GREY
ML4S S VN NW 35h AL00 I
ML4S S VN NW 60H AL00 I
ML4S S VN NW 80H AL00 I
ML4S S VN NW 10H AL00 I
400 N*
400 N*
24 VDC
n/a
3 min ON - 7 min off
11mm/s
6mm/s
200-250-300-350 mm
400-500-550-600 mm
650-700-750-800 mm
850-900-950-1000 mm MILLIMETRIC ADJUSTMENT WITH
TOP HUNG OUTWARD, BOTTOM TOP HUNG OUTWARD, BOTTOM
HUNG INWARD, HINGED, SKYLIGHT
DOMES, PANTOGRAPH
-5°C + 50°C
30
YES
1 A
24 W
-
-
CURRENT ABSORPTION
VERIFY
NO
26 X 41 X 563/688/788/888 mm 26 X 41 X 563/688/788/888 mm
SILICONE 4X1 L=2500mm
ENCODER
AMPEROMETRIC
2200 N
1.480 Kg
GREY
ML4S S RW NW 35L AL00 I
ML4S S RW NW 60L AL00 I
ML4S S RW NW 80L AL00 I
ML4S S RW NW 10L AL00 I
LIWIN L40 Slim WIFI
400 N*
400 N*
110/230 VAC
50/60 HZ
3 min ON - 7 min off
11mm/s
6mm/s
200-250-300-350 mm
400-500-550-600 mm
650-700-750-800 mm
850-900-950-1000 mm
MILLIMETRIC ADJUSTMENT WITH
MOWIN APP
TOP HUNG OUTWARD, BOTTOM
HUNG INWARD, HINGED, SKYLIGHT
DOMES, PANTOGRAPH
-5°C + 50°C
30
YES
0,40 A
42 W
0,010 A
0,8 W
CURRENT ABSORPTION
YES (MAX 30 ACTUATORS)
YES UP TO 8 ACTUATORS YES UP TO 8 ACTUATORS
26 X 41 X 563/688/788/888 mm
PVC 3x0.75 L=2500mm SILICONE 4X1 L=2500mm
ENCODER
AMPEROMETRIC
2200 N
1.660 Kg
GREY
ML4S S VN WF 35h AL00 I ML4S S RW WF 35L AL00 I
ML4S S VN WF 60H AL00 I ML4S S RW WF 60L AL00 I
ML4S S VN WF 80H AL00 I ML4S S RW WF 80L AL00 I
ML4S S VN WF 10H AL00 I ML4S S RW WF 10L AL00 I
400 N*
400 N*
24 VDC
n/a
3 min ON - 7 min off
11mm/s
6mm/s
200-250-300-350 mm
400-500-550-600 mm
650-700-750-800 mm
850-900-950-1000 mm
MOWIN APP
DOMES, PANTOGRAPH
-5°C + 50°C
30
YES
1 A
24 W
0,025 A
0,6 W
CURRENT ABSORPTION
VERIFY
ENCODER
AMPEROMETRIC
2200 N
1.860 Kg
GREY