Troy-Bilt 01924 Manual Del Propietário página 13

GENERAL MAmNTENANCE
RECOHHENDATmONS
The Owner/Operator is responsible for malting surethat
all periodic maintenance tasks are completed on a timely
basis; that all discrepandes are corrected; and that the unit
iskept cleanand properlystored. NEVER operate a
damaged or defective generator.
Should you have questions about repladng components on
purTroy=Bil_ generator, p leasecall 1=888=611=6708
for
assistance.
_ine Maintenance
See engineowner's manual for instructions.
CAUTION
Used motor oil has been shown to cause skin cancer in
certain laboratory animals.
Thoroughly wash exposed areas with soap and water:
KEEP OUT OF REACH OF CHILDREN. DON'T
POLLUTE. CONSERVE RESOURCES. RETURN
USED OILTO COLLECTION CENTERS.
l
Generator Cleaning
o Use a damp clothto wipe exteriorsurfaces clean.
Generator
Maintenance
Generator maintenance consists of keeping the unit clean
and dry. Operate and store the unit in a clean dry
environment where it will not be exposed to excessive
dust, dirt, moisture or any corrosive vapors. Cooling air
slots in the generator must not become clogged with snow,
leaves or any other foreign material.
NOTE: DO NOT use a garden hose to clean generator.
VVater can enter engine fuel system and cause problems. In
addition, if water enters generator through cooling air slots,
some of the water will be retained in voids and cracks of
the rotor and stator winding insuhtion.VVater and dirt
buildup on the generator internal windings will eventually
decrease the insulation resistance of these windings.
®
®
®
DO NOT expose generator to excessive moisture, dust, dirt,
or corrosive vapors.
DO NOT insert an},, objects through cooling slots,
Use a soft bristle brush to loosen caked on dirt or oil.
Use a vacuum cleaner to pick up loose dirt and debris.
Use low pressure air (not to exceed 25 psi) to blow
away dirt. Inspect cooling air slots and opening on
generator.These openings must be kept clean and
unobstructed.
D ata Tag
Data tag information is very important if you need help from
our Customer Service Department or an authorized service
dealeu:
The data tag (Figure 9) is located on the engine support on
the muffler side of the generator. For future reference, please
copy the model, revision, and serial number of the generator
in the space below.
[
MODEL
REV NO
SERmAL
A¢ VOLTS
AC AMPS
AC WATTS
DO VOLTS
DO AMPS
SinglePhase/ 60 Hz / 3600RPM
Ratedat 40° C/ ClassF nsuation
Copy Model
Number Here
Copy Revision
Here
Copy Serial
Number Here