Descargar Imprimir esta página

Troy-Bilt 01924 Manual Del Propietário página 4

Ocultar thumbs Ver también para 01924:

Publicidad

Idiomas disponibles

Idiomas disponibles

Section 1: Safety Rules
WARNING
WHEN
ADJUSTING
OR
MAKING
REPAiRSTOYOUR
GENERA'FOR
Disconnect
the spark piug w,h-e from the spark plug and place
the wh-e where it cannot contact
spark plug.
WNENTESTmNG
FOR ENGmNE
SPARK
Use approved spaN< plug tester:
DO NOT check for spark with spark plug remove&
WARNING
DO NOT touch hot surfaces.
Allow equipment
to cool before touchin&
The generator
must be at least S feet from structures
having
combustible
walls and/or other combustible
materials.
Keep at least 3 feet of clearance on all sides of generator
for
adequate coolin D maintenance
and servicing.
in the State of California
a spark arrester
is required
by law
(Section 4442 of the California
Public Resources Code). Other
states may have similar Iaws. Federal laws apply on federal
lands, if you equip the muffler
with a spark attesters it must be
maintained
in effective working
order.
CAUTION
DO NOT tamper with governed
spee& Generator
supplies
correct
rated frequency
and voltage when running at governed
speed.
DO NOT modify generator
in any way.
See "Don't
Overload
Generator".
Start generator
and let engine stabilize before connecting
electrical
loads.
Connect
electrical
loads in OFF posidon,
then turn ON for
operation.
Turn electricai
loads OFF and disconnect
from generator
before
stopping
generator.
Use generator
only for intended
uses.
If you have questions
about
intended
use, ask dealer
or call
1-888-61 1-6708.
Operate
generator
only on level surfaces.
DO NOT expose generator
to excessive moisture, dust, dirt,
or corrosive
vapors.
DO NOT insert any objects through cooling slots.
If connected
devices overheat, turn them off and disconnect
them from generator.
Shut off generator
ifi
-electrical
output
is lost;
-equipment
sparks, smokes, or emits flames;
-unit vibrates excessively.

Publicidad

loading