Publicidad
Idiomas disponibles
Idiomas disponibles
• For stainless steel edges of the hob
use a special cleaner suitable for
stainless steel.
• The stainless steel edge of the plate
can change the colour as a result of
high temperature.
• Wash stainless steel parts with water,
and then dry them with a soft cloth.
7.2 Cleaning the electric
hotplate
1. Use the cleaning powder or the
cleaning pad.
8. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
You cannot activate or op‐
erate the hob.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or
2. Clean the hob with a moist cloth and
3. Heat the hotplate to a low
4. To keep the hotplates in good shape,
Possible cause
The hob is not connected
to an electrical supply or it
is connected incorrectly.
The fuse is blown.
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre
and conditions of guarantee are in the
guarantee booklet.
some detergent.
temperature and let it dry.
rub in a sewing machine oil regularly.
Polish off the oil with absorbent
paper.
Remedy
Check if the hob is correct‐
ly connected to the electri‐
cal supply. Refer to the
connection diagram.
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
ENGLISH
9
Publicidad
